- It is also possible to use wood paneling to make foam or fiberglass insulation look great.
- The best material to use for basement walls would have to be precast panels.
How can I cover my basement walls cheaply?
Fortunately, you can cover basement foundation walls quickly and inexpensively. Attach wood furring strips, Z-shape channels, or 2×4 studs to flat, dry masonry walls, then add insulation and cover the strips or studs with drywall.
Is it worth remodeling a basement?
Finishing Your Basement Adds Value to Your Home According to Zillow, homeowners can expect to see an average of 70 percent return on their investment with a basement finish/remodel.
In what order should I remodel my basement?
- Apply for a Permit.
- Take Care of Dampness.
- Pick Your Materials.
- Gather Your Tools.
- Install Insulation.
- Frame the Walls.
- Install Utilities.
- Mount Drywall.
What is the cheapest way to finish an unfinished basement?
You can save on the cost to finish a basement by doing things not bound by codes: installing trim or doors, painting walls and woodwork, and installing flooring, says Buckeye Basements’ Jon Smith. Beyond that, count on using some pros.
What can I use instead of drywall in my basement?
- Wood Planks. Wood planks are an age-old drywall alternative that has certainly stood the test of time well.
- Veneer Plaster.
- Lath & Plaster.
- Plywood and Sheet Wood.
- Texture Wall Panels.
- Brick & Masonry.
- Exposed Concrete Block.
- Cement Board.
What adds the most value when finishing a basement?
- Additional Bedroom.
- Additional Bathroom.
- Great Return on Investment.
- Way to Add Space if Zoning Codes Don’t Allow Other Additions.
- Income Property.
- Add Recreation/Storage/Guest Space to Home.
- Sweat Equity.
- Don’t Have to Use High End Materials.
What is the hardest part of finishing a basement?
What’s the biggest challenge in finishing a basement? “Typically, the biggest challenge is working around obstructions. There are heating ducts, plumbing drains, water pipes, gas lines and electrical wires that are all off and hung below the floor joist.
Why do people not finish basement?
Use As Storage Some families prefer using the basement as a storage space for unused devices or nostalgic items that can’t be thrown away just yet. A basement used as a storage space does not need to be complete as the space won’t have as much traffic as other areas.
How do I prepare my basement for remodeling?
Do I need to insulate basement walls?
Walls. Basement walls should be insulated with non-water sensitive insulation that prevents interior air from contacting cold basement surfaces—the concrete structural elements and the rim joist framing.
What to Know Before finishing a basement?
- Check the Foundation. Before starting any construction in your basement, assess the state of the foundation.
- Identify Code Violations.
- Eliminate Water Issues.
- Insulate Properly.
- Assess the Ceiling.
- Work Around the Essentials in Your Design.
How do you make an unfinished basement nicer?
- Better Your Basement. 1/18.
- Lay Down Foam Mats. 2/18.
- String Some Lighting. 3/18.
- Throw Down Area Rugs. 4/18.
- Install Storage. 5/18.
- Paint Your Cinder Block. 6/18.
- Hang Curtains. 7/18.
- Create an Art Studio. 8/18.
How much does it cost to put drywall in a basement?
Cost to Drywall a Basement Installing drywall costs an average of $1,850 or about $2 per square foot. Finishing basement walls in a 400 square foot space may run you $800, while 1,500 square feet is closer to $3,000.
Is it OK to paint basement walls?
Painting your basement walls can do more than just improve the look of your home; it can protect your foundation from water damage and moisture. Basement walls that are made out of finished drywall can be painted the same way that you would paint a standard wall in your home.
What can you cover concrete basement walls with?
Drywall. The most common way to cover concrete walls in a basement is drywall, a.k.a. sheetrock. Drywall comes in panels panels made from calcium sulfate dihydrate or “gypsum.” Panels come in different thicknesses and sizes, the most common being 4′ x 8′ x 1/2″ thick.
How can I cover my basement walls without framing?
- Painting the Concrete. The simplest way of treating those concrete or concrete block walls is to simply paint them.
- Veneer Plaster.
- Lath and Plaster.
- Exposed Concrete Blocks or Cement Board.
- Brick or Stone Masonry.
- Cork Board.
What is the cheapest way to cover a basement ceiling?
Thin wood paneling — typically 1/8- to 1/4-inch thick — can cover an exposed ceiling, and it’s available in a variety of designs. Fir plywood, hardboard, even oriented-strand-board (OSB) are even more affordable, but these less-expensive options typically require paint or sealant.
Do basement walls need to breathe?
Nowadays, houses are sealed up tight as a drum. It’s great for energy efficiency and your heating bill. But it’s bad for any moisture hiding in your home that can’t find its way out. That is why your walls need to breathe.
Do I need a vapor barrier on my basement walls?
As we covered, unfinished basements can benefit from a protective “barrier” layer. However, if your space is fully finished and has a bathroom/kitchen, a vapor barrier isn’t 100% necessary. Again, this comes down to your home, the climate, and your basement design.
Do you need to insulate basement walls below grade?
Your best bang for the dollar in this instance is to insulate the coldest part of the wall, again typically to 2-feet below grade. However, there are many instances where insulating the full wall is the best option, such as if your walls are stone, or the floor is earth or crushed stone with no vapor barrier.
Do appraisers look in basements?
If you have a functional attic, basement or garage, your appraiser will factor those assets into your overall home value. In most cases, the square footage of these areas won’t count towards your total home’s square footage.
Does adding a bathroom in the basement add value?
Adding a basement bathroom can increase your home’s resale value by 10%-20%. It also can turn a wasted space into an enjoyable addition to your home. The average basement bathroom will cost $3,000-$25,000, depending on the existing plumbing and condition of your basement.
Do basement bathrooms count appraisal?
As a general rule of thumb, listing agents and appraisers don’t count a finished basement toward the overall square footage, especially if the basement is completely below grade—a term that means below ground level.
What’s the first step in finishing a basement?
Many unfinished basements have simple concrete walls. To finish them, you’ll need to first insulate, then frame, and then finish up with drywall.