Closed-cell spray foam is the best way to insulate concrete basement walls. This is because it can achieve a higher R-value, along with excellent moisture resistance, with less thickness required. It can fill in all the gaps and spaces thoroughly, giving you the best protection against moisture and air infiltration.
Is a basement remodel worth it?
Finishing Your Basement Adds Value to Your Home According to Zillow, homeowners can expect to see an average of 70 percent return on their investment with a basement finish/remodel.
In what order should I remodel my basement?
- Apply for a Permit.
- Take Care of Dampness.
- Pick Your Materials.
- Gather Your Tools.
- Install Insulation.
- Frame the Walls.
- Install Utilities.
- Mount Drywall.
What is the cheapest way to remodel a basement?
You can save on the cost to finish a basement by doing things not bound by codes: installing trim or doors, painting walls and woodwork, and installing flooring, says Buckeye Basements’ Jon Smith. Beyond that, count on using some pros.
What is the hardest part of finishing a basement?
What’s the biggest challenge in finishing a basement? “Typically, the biggest challenge is working around obstructions. There are heating ducts, plumbing drains, water pipes, gas lines and electrical wires that are all off and hung below the floor joist.
Does adding a bathroom in the basement add value?
Adding a basement bathroom can increase your home’s resale value by 10%-20%. It also can turn a wasted space into an enjoyable addition to your home. The average basement bathroom will cost $3,000-$25,000, depending on the existing plumbing and condition of your basement.
Should you put insulation in basement walls?
Walls. Basement walls should be insulated with non-water sensitive insulation that prevents interior air from contacting cold basement surfaces—the concrete structural elements and the rim joist framing.
How long does it take to finish a 500 sq ft basement?
One of the most significant factors extending the basement remodeling length is the size of the basement. If your basement is less than 500 square meters in size, the finishing time maybe just 2-3 weeks, compared to a 1000 square feet basement that may take double the time to finish.
What to Know Before finishing a basement?
- Check the Foundation. Before starting any construction in your basement, assess the state of the foundation.
- Identify Code Violations.
- Eliminate Water Issues.
- Insulate Properly.
- Assess the Ceiling.
- Work Around the Essentials in Your Design.
What do I need to know about remodeling my basement?
- Get Moisture Under Control.
- Decide on the Basement’s Purpose.
- Prioritize Wall System Planning.
- Develop an Electrical Plan.
- Plan Heating and Cooling in Advance.
- Incorporate Egress Requirements.
How do I prepare my basement for remodeling?
How much does it cost to add a bathroom in a basement?
Adding a bathroom in a basement costs $8,000 to $15,000 on average. You’ll save $500 to $1,000 if you have a rough-in drain already in place – typical in newer homes and usually near the main drain line.
What can I use instead of drywall in my basement?
- Wood Planks. Wood planks are an age-old drywall alternative that has certainly stood the test of time well.
- Veneer Plaster.
- Lath & Plaster.
- Plywood and Sheet Wood.
- Texture Wall Panels.
- Brick & Masonry.
- Exposed Concrete Block.
- Cement Board.
What is the cheapest way to finish a basement ceiling?
A super easy DIY option for your basement ceiling is glue-on tiles. Typically made of polystyrene or fiberboard, these tiles come in a variety of colors, sizes, and styles, and are also paintable. You’ll need to install a foundation, like plywood, to glue them to. But after that, it’s as simple as glue and stick.
Why do so many houses have unfinished basements?
Some just want the room to act as extra storage or utility room that won’t need as much attention as other rooms. It could also be that a homeowner wants to leave a basement incomplete to pave way for its customization. Such a basement will remain incomplete until the owner is ready to start the redesign process.
What should I put on my basement floor?
- Paint. (Under $10/sq.
- Rubber tile or rubber sheets.
- Vinyl planks or tiles.
- Sheet vinyl.
- Engineered wood flooring.
How do you put a toilet in a basement without breaking concrete?
You can tie a bathroom tub or shower into an upflush toilet system, which eliminates the need to break into the concrete floor. The system sends the wastewater from the shower drain and toilet to a holding tank before being pumped to the main sewer line.
Is a good idea to have a bathroom in the basement?
Adding a bathroom to your basement makes it livable space, which increases the overall market value of your home. A bathroom in your basement can also be a huge selling point for buyers if you are ever looking to sell. When a basement is unfinished with no bathroom, buyers look at the basement as wasted space.
What adds the most value to a house?
- Kitchen Improvements. If adding value to your home is the goal, the kitchen is likely the place to start.
- Bathrooms Improvements. Updated bathrooms are key for adding value to your home.
- Lighting Improvements.
- Energy Efficiency Improvements.
- Curb Appeal Improvements.
How much does it cost to put a ceiling in a basement?
Average costs to finish a basement could run between $2,000 to $11,200 if you install a 400-square-foot drop ceiling. This includes $1,200 to $9,200 in materials for a large area. Labor also increases with the square footage and lands in the $800 to $2,000 range.
What is the difference between sheetrock and drywall?
Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.
How much should I charge to frame a basement?
It costs an average of $1,200 to frame a basement, with a typical range of between $500 and $1,600. It can cost as little as $250 to frame a small basement and as much as $4,000 for a large one. There are three types of basements: masonry wall, poured concrete, and precast panel.
Should my basement ceiling be insulated?
Yes. Faced insulation is actually recommended on basement ceilings and ceilings in general. The covering or “face” of the insulation prevents it from falling out and trickling down into the basement air. This is especially advantageous if the insulation is made of fiberglass, which can harmful if it’s ingested.
What is the cheapest way to insulate basement walls?
The smart and inexpensive way to insulate joist bays is to use extruded polystyrene (XPS) foam insulation panels cut to size to fit inside the bay and “glued” in with expanding foam. When the expanding foam hardens, trim away the excess and cover the foam with a piece 1/2″ thick drywall to meet fire code.
Should you put a vapor barrier on basement walls?
It is best to place vapor barriers on foundation walls in basements before installing posts and doing primary insulation. Installing a moisture barrier will help keep moisture in the basement and prevent it from seeping into the walls and floors, leaving no room for mold.