What does it cost to finish a basement in Utah?

Complete basement finishing projects usually run between $30,000 and $60,000. This cost is determined primarily on your basement square footage size. Other factors include framing, drywall, painting, doors, lighting, ceilings, electrical, bathrooms, kitchenettes, living rooms, etc.

Is it worth remodeling a basement?

Finishing Your Basement Adds Value to Your Home According to Zillow, homeowners can expect to see an average of 70 percent return on their investment with a basement finish/remodel.

Do I need a permit to finish my basement in Utah?

Permits, Inspections & Insurance. Do I have to pull a building permit? Yes. It’s required by every municipality in Utah.

Should you put insulation in basement walls?

Walls. Basement walls should be insulated with non-water sensitive insulation that prevents interior air from contacting cold basement surfaces—the concrete structural elements and the rim joist framing.

How much does it cost to put a ceiling in a basement?

Average costs to finish a basement could run between $2,000 to $11,200 if you install a 400-square-foot drop ceiling. This includes $1,200 to $9,200 in materials for a large area. Labor also increases with the square footage and lands in the $800 to $2,000 range.

What is the difference between sheetrock and drywall?

Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.

How much should I charge to frame a basement?

It costs an average of $1,200 to frame a basement, with a typical range of between $500 and $1,600. It can cost as little as $250 to frame a small basement and as much as $4,000 for a large one. There are three types of basements: masonry wall, poured concrete, and precast panel.

How much value does a basement bathroom add?

Adding a basement bathroom can increase your home’s resale value by 10%-20%. It also can turn a wasted space into an enjoyable addition to your home. The average basement bathroom will cost $3,000-$25,000, depending on the existing plumbing and condition of your basement.

How much does it cost to wire a finished basement?

Wiring a Basement Typical costs for wiring a 1,000 square-foot basement area runs from $800 to $1,500, depending on the number of recess lights and bedrooms in basement. The lower price range is for large open spaces; the higher costs are for basements that are subdivided into separate rooms.

How can I cover my basement ceiling cheaply?

A super easy DIY option for your basement ceiling is glue-on tiles. Typically made of polystyrene or fiberboard, these tiles come in a variety of colors, sizes, and styles, and are also paintable. You’ll need to install a foundation, like plywood, to glue them to. But after that, it’s as simple as glue and stick.

What is the hardest part of finishing a basement?

What’s the biggest challenge in finishing a basement? “Typically, the biggest challenge is working around obstructions. There are heating ducts, plumbing drains, water pipes, gas lines and electrical wires that are all off and hung below the floor joist.

How can I save money to remodel my basement?

  1. Opt for an inexpensive, prefabricated egress window and well.
  2. Test exterior walls for moisture before finishing.
  3. Cut out some studs.
  4. Install drop ceilings.
  5. Skip the carpet and install luxury vinyl tile instead.
  6. Add a bathroom (or at least a half bath) near existing plumbing.

Can I finish my own basement in Utah?

Some Utah homeowners take on the task of finishing their basement themselves. While it isn’t impossible to do it on your own, it does take a lot more work. There is plenty of information online to help you finish your basement.

Can a homeowner do their own electrical work in Utah?

State law does allow a homeowner of a single family residence to do his or her electrical work.

Why are basements common in Utah?

Utah has a dry, semi-arid and desert climate, and therefore many basements here are completely below-grown. This helps to keep this room much cooler in the summer when temperatures can easily reach into the 100s.

What is the cheapest way to insulate basement walls?

The smart and inexpensive way to insulate joist bays is to use extruded polystyrene (XPS) foam insulation panels cut to size to fit inside the bay and “glued” in with expanding foam. When the expanding foam hardens, trim away the excess and cover the foam with a piece 1/2″ thick drywall to meet fire code.

Should my basement ceiling be insulated?

Yes. Faced insulation is actually recommended on basement ceilings and ceilings in general. The covering or “face” of the insulation prevents it from falling out and trickling down into the basement air. This is especially advantageous if the insulation is made of fiberglass, which can harmful if it’s ingested.

Should you put a vapor barrier on basement walls?

It is best to place vapor barriers on foundation walls in basements before installing posts and doing primary insulation. Installing a moisture barrier will help keep moisture in the basement and prevent it from seeping into the walls and floors, leaving no room for mold.

What is the best ceiling for a basement?

Suspended ceilings are one of the most popular basement ceilings. Consisting of a simple grid and lightweight tiles or panels, a suspended ceiling covers exposed beams, ductwork, and electrical wiring, while allowing easy access for repairs or leaks.

Is it OK to drywall basement ceiling?

The Drywall or Sheetrock Ceiling for Basements Drywall uses less space so it is a good choice when you have low ceilings and need to take advantage of all the headroom possible. Drywall will not sag.

Is it cheaper to drywall or drop ceiling?

Drop ceilings are more expensive to install than drywall making drywall the cheaper option. However, if you can install a drop ceiling by yourself, you can save on labor costs. You should also factor in paint costs for a drywall ceiling and whether you are hiring a professional to install and paint for you.

What is the best drywall to use in a basement?

Use PURPLE XP® Hi-Impact® Drywall, featuring a fiberglass mesh embedded into its core, to prevent accidental holes in high-activity areas. For low-activity spaces, PURPLE XP® Drywall protects against the moisture, mold, and mildew often found in basements.

Is drywall supposed to touch the floor?

Drywall should never touch the floor. Allow for a 1/2-inch (1.27 cm) space between your new wall and your old flooring, so there is room for expansion of both materials without cracking the drywall.

What is purple sheetrock used for?

Purple drywall resists moisture, mold and mildew. In addition, Purple drywall also resists scratches , scuffs and dents so it’s good choice for high-traffic areas. Purple drywall is about 30% more expensive than regular drywall. Here is a collection of tips for preventing bathroom mold.

How much does it cost to drywall a basement ceiling?

Drywall: It costs around $1.50 per square foot to hang drywall in your basement. Ceiling: Basic ceiling installation can cost as little as $1-2 per square foot. But, if the project is complex, it can cost around $6 per square foot.

Do NOT follow this link or you will be banned from the site!