How much does it cost to put drywall in a basement?

Cost to Drywall a Basement Installing drywall costs an average of $1,850 or about $2 per square foot. Finishing basement walls in a 400 square foot space may run you $800, while 1,500 square feet is closer to $3,000.

What is the cheapest way to remodel a basement?

You can save on the cost to finish a basement by doing things not bound by codes: installing trim or doors, painting walls and woodwork, and installing flooring, says Buckeye Basements’ Jon Smith. Beyond that, count on using some pros.

What is the cheapest way to finish an unfinished basement?

If you’re wondering if paneling or drywall is the cheaper finishing option, generally speaking, drywall is cheaper than paneling. This is because it requires less attention to detail and finish work during the installation process. Drywall also adds better soundproofing than paneling, and it’s easier to repair.

Is it worth remodeling a basement?

Finishing Your Basement Adds Value to Your Home According to Zillow, homeowners can expect to see an average of 70 percent return on their investment with a basement finish/remodel.

How do you make an old basement look good?

  1. Better Your Basement. 1/18.
  2. Lay Down Foam Mats. 2/18.
  3. String Some Lighting. 3/18.
  4. Throw Down Area Rugs. 4/18.
  5. Install Storage. 5/18.
  6. Paint Your Cinder Block. 6/18.
  7. Hang Curtains. 7/18.
  8. Create an Art Studio. 8/18.

What is the hardest part of finishing a basement?

What’s the biggest challenge in finishing a basement? “Typically, the biggest challenge is working around obstructions. There are heating ducts, plumbing drains, water pipes, gas lines and electrical wires that are all off and hung below the floor joist.

What can I use instead of drywall in my basement?

  • Wood Planks. Wood planks are an age-old drywall alternative that has certainly stood the test of time well.
  • Veneer Plaster.
  • Lath & Plaster.
  • Plywood and Sheet Wood.
  • Texture Wall Panels.
  • Brick & Masonry.
  • Exposed Concrete Block.
  • Cement Board.

How can I cover my basement walls cheaply?

Fortunately, you can cover basement foundation walls quickly and inexpensively. Attach wood furring strips, Z-shape channels, or 2×4 studs to flat, dry masonry walls, then add insulation and cover the strips or studs with drywall.

How can I finish my basement without finishing it?

  1. Keep the ceiling exposed.
  2. Ditch the drywall.
  3. Capture the power of white.
  4. Establish a focal point.
  5. Get creative with paint and decor.
  6. Install cabinetry.
  7. Just do the basics.
  8. Dress up with shine.

What adds the most value when finishing a basement?

  1. Additional Bedroom.
  2. Additional Bathroom.
  3. Great Return on Investment.
  4. Way to Add Space if Zoning Codes Don’t Allow Other Additions.
  5. Income Property.
  6. Add Recreation/Storage/Guest Space to Home.
  7. Sweat Equity.
  8. Don’t Have to Use High End Materials.

Does adding a bathroom in the basement add value?

Adding a basement bathroom can increase your home’s resale value by 10%-20%. It also can turn a wasted space into an enjoyable addition to your home. The average basement bathroom will cost $3,000-$25,000, depending on the existing plumbing and condition of your basement.

Is it OK to paint basement walls?

Painting your basement walls can do more than just improve the look of your home; it can protect your foundation from water damage and moisture. Basement walls that are made out of finished drywall can be painted the same way that you would paint a standard wall in your home.

How can I make my concrete basement walls look better?

  1. using drywall and paint to cover concrete walls.
  2. painting the concrete or block wall.
  3. Brick veneer panels for basement walls.
  4. cover your walls with real barnboards.
  5. combination weathered wood and painted drywall.
  6. use wallpaper to finish your basement walls.

Is it possible to finish an old basement?

Some basements are natural candidates for finishing. Others will require structural work before walls and plumbing can be installed. If the structure is old or poorly built, there may be issues with the foundation, ceiling height, electrical, plumbing, or other fundamental features.

Do you need to insulate basement walls?

Walls. Basement walls should be insulated with non-water sensitive insulation that prevents interior air from contacting cold basement surfaces—the concrete structural elements and the rim joist framing.

What is a Yankee basement?

What Is A Yankee Basement? A Yankee basement is a root cellar. The name for the space comes from the dugout in baseball, which is the area where teams have their benches located in foul territory.

Why do so many houses have unfinished basements?

Some just want the room to act as extra storage or utility room that won’t need as much attention as other rooms. It could also be that a homeowner wants to leave a basement incomplete to pave way for its customization. Such a basement will remain incomplete until the owner is ready to start the redesign process.

What is the cheapest way to cover a basement ceiling?

Thin wood paneling — typically 1/8- to 1/4-inch thick — can cover an exposed ceiling, and it’s available in a variety of designs. Fir plywood, hardboard, even oriented-strand-board (OSB) are even more affordable, but these less-expensive options typically require paint or sealant.

What is the best material for basement walls?

  • It is also possible to use wood paneling to make foam or fiberglass insulation look great.
  • The best material to use for basement walls would have to be precast panels.

Is it cheaper to drywall or shiplap?

Cost and Installation Drywall panels are cheaper than shiplap per sq. ft., but once you factor in the cost of installation, shiplap usually comes out ahead as the more budget-friendly option. The average price for drywall is $15 per 4-by-8 foot panel or around $2.15 per sq.

How do you cover concrete walls in a basement without drywall?

  1. Paint.
  2. Basement Panels.
  3. Wood Fiberboard.
  4. Fabric.
  5. Vinyl and Wallpaper.
  6. Stone Veneer.
  7. Pargeting.
  8. Exposed Brick.

What can I cover my concrete basement walls with?

Drywall. The most common way to cover concrete walls in a basement is drywall, a.k.a. sheetrock. Drywall comes in panels panels made from calcium sulfate dihydrate or “gypsum.” Panels come in different thicknesses and sizes, the most common being 4′ x 8′ x 1/2″ thick.

Can you put drywall directly on concrete?

You can glue drywall sheets to a concrete block wall. Drywall is usually attached to wall studs with 2-inch drywall screws using an electric drill with a driver bit installed. However, in some installations, such as in a basement, it is necessary to glue drywall sheets to the interior of concrete block walls.

How much does it cost to put a ceiling in a basement?

Average costs to finish a basement could run between $2,000 to $11,200 if you install a 400-square-foot drop ceiling. This includes $1,200 to $9,200 in materials for a large area. Labor also increases with the square footage and lands in the $800 to $2,000 range.

How much does it cost to drywall a 12×12 room?

The average cost to drywall a 12×12 room is $580 to $1,800. Drywalling a master bedroom or living room costs $850 to $3,100. Most drywall contractors charge higher rates per square foot for small jobs.

Do NOT follow this link or you will be banned from the site!