How do you spice up an unfinished basement?

  1. Add a Fresh Coat of Paint. Andy Dean Photography/Shutterstock.
  2. Cover Unsightly Walls with Curtains.
  3. Use Foam Floor Mats.
  4. Create a Laundry Room.
  5. Create Under-Stair Storage.
  6. Create an Industrial Bar.
  7. Paint Your Ceiling.
  8. Hang String Lights.

What is the cheapest way to remodel a basement?

You can save on the cost to finish a basement by doing things not bound by codes: installing trim or doors, painting walls and woodwork, and installing flooring, says Buckeye Basements’ Jon Smith. Beyond that, count on using some pros.

What is the cheapest way to finish an unfinished basement?

If you’re wondering if paneling or drywall is the cheaper finishing option, generally speaking, drywall is cheaper than paneling. This is because it requires less attention to detail and finish work during the installation process. Drywall also adds better soundproofing than paneling, and it’s easier to repair.

How do you make an old basement look good?

  1. Better Your Basement. 1/18.
  2. Lay Down Foam Mats. 2/18.
  3. String Some Lighting. 3/18.
  4. Throw Down Area Rugs. 4/18.
  5. Install Storage. 5/18.
  6. Paint Your Cinder Block. 6/18.
  7. Hang Curtains. 7/18.
  8. Create an Art Studio. 8/18.

What is the hardest part of finishing a basement?

What’s the biggest challenge in finishing a basement? “Typically, the biggest challenge is working around obstructions. There are heating ducts, plumbing drains, water pipes, gas lines and electrical wires that are all off and hung below the floor joist.

Is finishing a basement worth it?

Many people wonder if finishing their basement is worth the time, effort, and money to remodel their downstairs space. To answer that directly, yes, finishing your basement will almost always increase the value of your property. The standard return is around 70%, according to Remodeling.HW.net.

How can I cover my basement walls cheaply?

Fortunately, you can cover basement foundation walls quickly and inexpensively. Attach wood furring strips, Z-shape channels, or 2×4 studs to flat, dry masonry walls, then add insulation and cover the strips or studs with drywall.

What can I use instead of drywall in my basement?

  • Wood Planks. Wood planks are an age-old drywall alternative that has certainly stood the test of time well.
  • Veneer Plaster.
  • Lath & Plaster.
  • Plywood and Sheet Wood.
  • Texture Wall Panels.
  • Brick & Masonry.
  • Exposed Concrete Block.
  • Cement Board.

How much does it cost to put drywall in a basement?

Cost to Drywall a Basement Installing drywall costs an average of $1,850 or about $2 per square foot. Finishing basement walls in a 400 square foot space may run you $800, while 1,500 square feet is closer to $3,000.

Is it OK to paint basement walls?

Painting your basement walls can do more than just improve the look of your home; it can protect your foundation from water damage and moisture. Basement walls that are made out of finished drywall can be painted the same way that you would paint a standard wall in your home.

What should I put on my basement ceiling?

A super easy DIY option for your basement ceiling is glue-on tiles. Typically made of polystyrene or fiberboard, these tiles come in a variety of colors, sizes, and styles, and are also paintable. You’ll need to install a foundation, like plywood, to glue them to. But after that, it’s as simple as glue and stick.

How can I make my concrete basement walls look better?

  1. using drywall and paint to cover concrete walls.
  2. painting the concrete or block wall.
  3. Brick veneer panels for basement walls.
  4. cover your walls with real barnboards.
  5. combination weathered wood and painted drywall.
  6. use wallpaper to finish your basement walls.

How do you turn an unfinished basement into a living space?

  1. Measure Your Basement.
  2. Inspect Existing Construction Quality.
  3. Install Insulation and Moisture Protection.
  4. Install the Right Egress Windows.
  5. Inspect for Radon.
  6. Check for Rot and Pest Damage.
  7. Install a Sump Pump.

What is Wahoo wall?

How do you cover concrete walls indoors?

  1. The first step to cover a concrete wall is to seal it. Concrete is porous and absorbs water like a sponge.
  2. Build a frame out of wood or metal.
  3. Fill the cavities with insulation.
  4. Hang the drywall by screwing it to the wood.
  5. Spackle and sand as needed.
  6. Paint or finish the drywall as needed.

Do you need to insulate basement walls?

Walls. Basement walls should be insulated with non-water sensitive insulation that prevents interior air from contacting cold basement surfaces—the concrete structural elements and the rim joist framing.

What is a Yankee basement?

What Is A Yankee Basement? A Yankee basement is a root cellar. The name for the space comes from the dugout in baseball, which is the area where teams have their benches located in foul territory.

Does finishing basement increase home value?

In the United States, on average, finishing a basement will give you a return of 70 to 75% of your investment. For example, if you spent $1,000 on improvements, it would increase the value of the property by about $700. If you spent $10,000 on improvements, it would increase the value of the property by about $7,000.

Does adding a bathroom in the basement add value?

Adding a basement bathroom can increase your home’s resale value by 10%-20%. It also can turn a wasted space into an enjoyable addition to your home. The average basement bathroom will cost $3,000-$25,000, depending on the existing plumbing and condition of your basement.

Why are basements left unfinished?

Some just want the room to act as extra storage or utility room that won’t need as much attention as other rooms. It could also be that a homeowner wants to leave a basement incomplete to pave way for its customization. Such a basement will remain incomplete until the owner is ready to start the redesign process.

Do basement bathrooms count appraisal?

As a general rule of thumb, listing agents and appraisers don’t count a finished basement toward the overall square footage, especially if the basement is completely below grade—a term that means below ground level.

How do you cover concrete walls in a basement without drywall?

  1. Paint.
  2. Basement Panels.
  3. Wood Fiberboard.
  4. Fabric.
  5. Vinyl and Wallpaper.
  6. Stone Veneer.
  7. Pargeting.
  8. Exposed Brick.

What is the best material for basement walls?

  • It is also possible to use wood paneling to make foam or fiberglass insulation look great.
  • The best material to use for basement walls would have to be precast panels.

Can you put drywall directly on concrete?

You can glue drywall sheets to a concrete block wall. Drywall is usually attached to wall studs with 2-inch drywall screws using an electric drill with a driver bit installed. However, in some installations, such as in a basement, it is necessary to glue drywall sheets to the interior of concrete block walls.

What is the cheapest way to cover a basement ceiling?

Thin wood paneling — typically 1/8- to 1/4-inch thick — can cover an exposed ceiling, and it’s available in a variety of designs. Fir plywood, hardboard, even oriented-strand-board (OSB) are even more affordable, but these less-expensive options typically require paint or sealant.

Do NOT follow this link or you will be banned from the site!