# How do you connect 3 recessed lights?

## How far apart should 3 recessed lights be?

A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting.

## How many recessed lights can you put on one switch?

The main limitation on the number of recessed lights that a single switch can control is the rating of the circuit breaker controlling the circuit. Each incandescent or halogen 60-watt bulb draws around 1/2 amp, and therefore, standard lighting with a 15amp breaker can manage 30 lights.

## Is there a difference between can lights and recessed lights?

Recessed lights, also known as downlights or can lights, are a type of lighting fixture installed into the ceiling or wall. They are designed to sit flush with the surface for a sleek and polished finish. The housing and electrical wiring components are hidden, and the bulb appears to glow from within the opening.

## Is there such thing as too many recessed lights?

It often seems that installing recessed lights is a cure all, but they cannot properly wash light upon walls and all dark corners, which would bounce reflective light into the room. In fact, using too many recessed light may leave areas of your room dark and may even cost you more on your electric bill.

## How do you calculate how many recessed lights are needed?

Formula: total sq. footage x 1.5 = total wattage needed. Total wattage divided by 60 watts (or whichever wattage you select) = total amount of recessed can lights. Example: 240 square foot room x 1.5 = 360 divided by 60 (the bulb wattage I’d like to use) = 6 recessed lights needed.

## How many can lights in a 20×20 room?

If you have a center light fixture, you should be able to use 4 inch line voltage cans or low voltage for supplemental lighting. I would go with at least 8 three inch cans for a 20 foot room.

## Can I daisy-chain recessed lights?

Remember that you must run one ultra-thin extension cable (or run of low voltage wire) for each light. You can not daisy chain multiple lights together.

## Should recessed lights be wired in series or parallel?

Wiring in series reduces the voltage of each light. For example, if you have four lights rated for 12 volts, they will need to be wired in parallel to receive the full 12 volts. But, if you have four lights rated for 3 volts, you can wire them in series and connect them to a 12-volt source.

## How many LED lights can you daisy chain?

For example, if you choose a 120-volt power supply for daisy-chaining 10-watt LED tube lights, you will be able to connect 12 LEDs. However, to sail on the safer side, make sure that you do not connect more than seven tube lights to a power supply.

## How do I run multiple lights off one switch?

You can do this light switch wiring in one of two ways. The most common is to daisy-chain the light fixtures by connecting them to each other and hooking the first one up to the switch. The other way to wire multiple lights to one switch is to connect all of them directly to the switch in a “home run” configuration.

## What is better than recessed lighting?

Luckily, there is now a better alternative to recessed can lights. What many people are now using in their homes instead of recessed can lights is a light fixture called a disc light. The disc light is a very thin LED light, typically about an inch tall, that is mounted to the surface of the ceiling.

## Will recessed lighting go out of style?

Recessed lighting will never go out of style. However, the finishes and sizes will vary and change as time goes by.

## What does it cost to have recessed lighting installed?

Recessed lighting installation costs \$125 to \$300 per light, including \$75 to \$200 for labor and \$50 to \$100 for the can light fixture itself. Prices depend on the bulb, trim, and housing type selected, the ceiling style and material, and the amount of wiring required for the installation.

## How many can lights for a 12×12 kitchen?

A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space.

## Does recessed lighting add value?

LED recessed lighting is particularly appealing to prospective buyers and, according to research by Vonn, could add anything between 1% and 3% to your home’s value – enough to pay some estate agent fees!

## How many LED lights can you put on one circuit?

A regular 15A circuit can have up to 1400W of lights connected, or one 1400W light or 14 100W light bulbs. Most homes allow for 23 to 40 60-watt bulbs or 280 to 480 5-watt LEDs.

## How much area does a 6 inch recessed light cover?

If a 6-inch light has a spacing criteria of 1.5 and the ceiling height is 8 feet, the maximum space between each light should be 12 feet. This formula is critical for lighting a space because if the lights are too far apart, they will look like spotlights with big shadows between each other.

## How far apart should 6 inch recessed lights be?

Generally speaking, recessed lights that are four inches in size should be placed four feet apart. Six-inch lights should be placed six feet apart. In other words, the diameter of the lights equals the space between them.

## How many recessed lights do I need in my kitchen?

To determine how many recessed lights your kitchen needs, first measure the dimensions of your kitchen. Multiply the length by the width to calculate your kitchen’s square footage — then multiply this by 1.5 to find the total wattage needed. Finally, divide this number by the wattage of the bulbs you will use.

## How far should recessed lights be from wall in kitchen?

Keep your fixtures between 1.5 and 3 feet away from the wall. Space fixtures equidistant from each other.

## Does recessed lighting have to be symmetrical?

If you use recessed lighting as task lighting, the general rule for symmetry is if you have more than one light, they must be aligned evenly. What is this? Small puck lights give you the choice of mounting recessed or surface. Their small size makes them perfect for specific tasks rather than general lighting.

## How many LED recessed lights can I put on a 15 amp circuit?

Each CFL or LED bulb typically gives the same amount of light as a 60-watt incandescent bulb while drawing 10 watts or less, which is equivalent to a current draw of 1/12 amp. Thus a 15-amp circuit can safely control 180 or more fixtures that use CFL or LED bulbs.

## How many LED recessed lights on a 20 amp circuit?

Maximum Lights Per Circuit Technically, you can install 13 outlets or lights on a 20-amp CB, but you can only put ten lights per circuit due to the 80% rule of maximum continuous load.