Do basements need special toilets?

A basement toilet is a necessary addition to your basement bathroom, but plumbing a basement toilet is a different animal. Check out these solutions for installing a new “Porcelain God” in your basement bathroom. One option for basement plumbing is below ground water and waste pipes.

How can I update my basement bathroom?

Is a basement bathroom worth it?

Adding a bathroom to your basement makes it livable space, which increases the overall market value of your home. A bathroom in your basement can also be a huge selling point for buyers if you are ever looking to sell. When a basement is unfinished with no bathroom, buyers look at the basement as wasted space.

Can you put a toilet in the basement?

If you think plumbing can be difficult above ground, then you can only imagine the challenges that arise when installing a basement toilet. But don’t give up just yet: With the right plumbing solutions for your space, you can easily install a basement toilet.

How do you install an Upflush toilet in a basement?

How do you put a bathroom in a basement without breaking concrete?

You can tie a bathroom tub or shower into an upflush toilet system, which eliminates the need to break into the concrete floor. The system sends the wastewater from the shower drain and toilet to a holding tank before being pumped to the main sewer line.

What kind of toilet is best for a basement?

  • Saniflo SaniPLUS Toilet Kit.
  • Sanimove Macerating Toilet 3 piece Set.
  • Liberty Pumps ASCENTII-ESW Macerating Toilet.
  • INTELFLO Upflush Macerating Toilet System.
  • INTELFLO 600W Macerator Pump Toilet.

What is the best toilet for a basement?

Best Toilets for the Basement The best macerating toilets to install in a basement include those made by Saniflo and Liberty. They are compact, affordable and water-efficient as well as easy to install. The toilet should be flushed daily to keep it in good working order.

What kind of toilet can I put in my basement?

Upflushing toilets: An upflushing toilet is a self-contained unit that sits on the floor, so you don’t have to remove any concrete or excavate to install one. The plumbing lines run upward through the wall to the basement ceiling and connect to the sewer or septic tank line there.

Do basement bathrooms count appraisal?

As a general rule of thumb, listing agents and appraisers don’t count a finished basement toward the overall square footage, especially if the basement is completely below grade—a term that means below ground level.

What do I need to put a bathroom in my basement?

What you’ll need to install is an upflush toilet—or a sewage ejection system. Basically, there’s a special lined sump hole cut into your basement floor slab, and the macerating system for the sewage ejector sits in that.

How much resale value does a finished basement add?

In the United States, on average, finishing a basement will give you a return of 70 to 75% of your investment. For example, if you spent $1,000 on improvements, it would increase the value of the property by about $700. If you spent $10,000 on improvements, it would increase the value of the property by about $7,000.

How much does it cost to install a basement toilet?

The average price to install a toilet in a basement is $1,695. The additional costs are from installing new plumbing in an area where there previously wasn’t a bathroom. If there is existing plumbing and you’re replacing a toilet in a basement bathroom, the price will be closer to $372.

How do you vent a basement toilet?

How long do Upflush toilets last?

While an upflush toilet includes a macerator system and pump unit, everything else looks virtually the same. Upflush Toilets Have a Long Lifespan. Upflush toilets last for about 10-15 years before any of the mechanical components need to be replaced.

Does an upflush toilet need a vent?

Vent the Pump. Unless you’re using a SaniCOMPACT, which doesn’t require venting, you’ll need to vent the macerator pump into your home’s vent system.

Why do old houses have toilets in the basement?

To prevent sewage backup into the main part of the house, toilets were installed in the basement. “Sewage backs up the pipe and into the fixtures that are connected to it,” Martin told TODAY.

How do I install a toilet without plumbing?

Another version of a toilet without plumbing, upflush toilets use a macerator pump to move waste up against gravity. Because of this, they attach easily to your home’s main plumbing stack and don’t require any additional plumbing or demolition. Upflush toilets are not new technology.

How do you install a toilet in a basement concrete floor?

  1. Step 1: Place the Flange. Place the toilet flange face down on the concrete.
  2. Step 2: Drill Holes for the Flange. Next, use a marker to mark the concrete right where the four holes in the flange are.
  3. Step 3: Clean the Area.
  4. Step 4: Attach the Flange.
  5. Step 5: Finish the Flange Installation.
  6. Step 6: Connect the Toilet.

How hard is it to put a bathroom in a basement?

Adding a basement bathroom is a big, complicated project. But that doesn’t mean you can’t do it. Thousands of DIYers successfully tackle the job every year, and so can you. We will focus on installing the “DWV” system (drain, waste and vent), which is the most difficult part of plumbing a basement bathroom.

How far can an upflush toilet pump?

Our macerator can pump from 15 feet upward and downward to the sewer line and septic tank or 150 feet horizontally. Don’t worry about your bathroom floor.

Are up flush toilets reliable?

#6: A Longer Lifespan. Upflush toilets are built to last just as long as traditional toilets. Well-known brands such as Liberty Pumps and SaniFlo Macerating toilets are known to flush up to 50k times before the mechanical components require any replacement.

What is a macerating toilet?

Macerating toilets use a grinding or blending mechanism to reduce human waste to a slurry, which can then be moved by pumping. This is useful when, for example, water pressure is low or one wishes to install a toilet below the sewer drain pipe.

How much does it cost to add a half bath in a basement?

A half bath installed in the basement provides a more conveniently located bathroom out of the usual foot traffic. Also, the average cost to add a basement is around $10-15,000. However, if you add the basement under an existing bathroom, you can save anywhere between $1-2,000 in plumbing expenses.

Do you have to flush a Saniflo toilet daily?

– How long do they last? Saniflo products lasts about 10 to 15 years, if not longer. They have been tested for about 50,000 cycles, flushed 10 x a day = 3,650 flushes a year. As this was a standard test, it was stopped at 50,000 cycles, therefore they will last much longer.

Do NOT follow this link or you will be banned from the site!