Can you move a toilet to a different location?

Moving the toilet is not a change to be taken lightly. But if needed, it can be accomplished with substantial plumbing work and a great deal of peripheral work, such as opening up a floor or ceiling, rerouting pipes and drain flange, and re-installing the toilet and other fixtures.

Can you move a toilet in a bathroom remodel?

If moving the toilet makes sense for your layout, is it possible? Of course! It just requires involving the experts like an experienced plumber and a bathroom design professional.

How expensive is it to relocate the toilet in a bathroom?

Cost of Moving Plumbing Fixtures The cost to move a toilet or sinks can be $2,500-$3,500 per fixture. Plumbing can be a significant cost factor in a remodel when a bathroom floor plan is altered. The toilet is the most expensive to move.

Can you reposition a toilet?

Yes, you can actually move a toilet. Even moving a toilet by a few inches without having to make a new hole in the floor is possible. You can use an offset toilet flange to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line and in turn help to save you a lot of money.

How hard is it to reroute plumbing?

Relocating plumbing can be a time consuming and hard work. That’s why you should only do it if you have prepared beforehand and if you have confidence in the professionals you chose to do the job. But take comfort in the fact that once it’s done, you won’t have to think about it for a long time.

Why is it so expensive to move a toilet?

Moving a toilet or a shower while renovating your bathroom is a difficult job. Technically, it can be more expensive to move a toilet because of the water, waste, and venting moves that go into it.

Is it easy to move a toilet a couple inches?

If your bathroom is on top a concrete slab, we have some bad news. To move the toilet more than just a couple of inches, you will have to demolish the concrete to access and relocate water and waste lines. Then you will have to rebuild the concrete foundation and replace the sub-flooring, flooring, and fixtures.

Can you swap a toilet and sink?

You can potentially rearrange fixtures and still make use of the existing plumbing. For instance, you can have your toilet and your sink swap places. However, there’s more to this job than meets the eye. You have cold water running to the existing toilet area, which fills the tank in the back.

Can a toilet and shower share the same drain?

The general answer is that the showers and toilets can use the same drain, but they should not be sharing the same waste trap arm. There are other factors to consider as well, such as whether your drains lead to the main sewer line, or if there are septic tanks that are used in your city or town.

Can you move a toilet to an inside wall?

Generally, you can install a toilet on an internal wall as long as there is enough room underneath the floor to run the waste line to the mainline. Because the waste line needs to slope, the required height under the floor is a factor of the slope (1:40) and the distance to the wall.

How far can you offset a toilet?

The typical offset is 12-inches for most residential toilets. As a result, the toilet had 4-inches behind the tank.

Can I rotate my toilet 90 degrees?

Re: Rotate toilet 90 degrees No, toilets are pretty much fixed in place–moving them is a serious matter of replumbing that 3″ waste line, redoing the floor, etc. Probably not worth it unless you are doing a very serious bathroom reno.

Can you move a toilet to where a shower was?

Can you put a toilet where a shower was? The simple answer is yes, you can put a toilet where a shower was, but the move doesn’t come without its issues. This isn’t a simple DIY job. You are going to have to remove at least one wall and, hopefully, only a small portion of the floor.

How far can a toilet be from the main stack?

2. Tie the waste line from the new toilet directly into the stack if the toilet is within six feet of the stack and the waste line is 3 inches in diameter. If the waste line is 4 inches in diameter, the toilet can be as far as 10 feet from the stack.

How do you reroute a toilet?

  1. Make a plan.
  2. Turn off the water.
  3. Remove remaining water.
  4. Disconnect the supply line from the toilet.
  5. Remove the bolts.
  6. Remove and move the tank.
  7. Remove and move the toilet bowl.

How much does it cost to rough in plumbing for a bathroom?

Rough-In Plumbing Cost Breakdown. The average cost to rough-in plumbing for a bathroom is $7,000. However, it can range from as low as $750 to as much as $20,000. The final price depends on the piping material, home size, labor fees, number of fixtures, and more.

Can water pipes be rerouted?

Many plumbing professionals may choose to reroute existing pipes that are located in a slab. While rerouting might be your only option, working with a professional who understands the logistics of is highly recommended. Though, it helps to understand the process before hiring a professional plumbing company.

How much does it cost to relocate a shower?

If you decide to change your shower’s layout or move your shower entirely, you need to move three lines – the hot and cold water and the drain. Moving one line is $80 to $200, so the total cost of moving and installing a new shower is between $1,740 – $4,100 on average.

Can you move a toilet in a basement?

If the basement is on a concrete slab, and the plumbing fixtures drain into floor drains, then there will be enough labor to relocate the drains. If you have a system that pumps your drain water up from the fixtures to above-foundation floor drains, there can be less labor.

Why is my toilet so far from the wall?

That means your flange was set at a distance further from the wall than even the 13″ you measured. A 14″ toilet might work, but a simpler and much cheaper fix would be to install an offset toilet flange.

Does a toilet have to be against a wall?

Your toilet tank can be close or far from the wall as long as its measurements are correct within your bathroom. This means that it should be compliant with the standard bathroom requirements to keep it functioning properly.

Can toilet waste pipe run under floor?

They can be mounted on the floor, but usually pipes run below the floor in-between the floor joists. The pipe diameter is 110mm. Running this pipe from one end of the house to the other simply is not practical.

How long can a toilet waste pipe be?

IIRC it is permissible (but inadvisable) to go as low as 18mm per metre, the maximum is 90mm per metre. As long as the pipe have at least 15% downhill slop from Toilet to main waste pipe it would be ok. Any distance up to 3m do not require extra joining points as standard 4inch waste pipe is 3m long.

How do you move a toilet closer to the wall?

Method #1: Use an offset flange Using an offset flange to shorten the distance from toilet to wall is definitely the quickest, easiest method out of the two we will be mentioning. The role of an offset flange is precisely to allow the toilet to be moved several inches, regardless of the direction.

Can you rotate a toilet 45 degrees?

To answer your question, if there is room to rotate the toilet without hitting the wall and the floor flange spins on the fitting or is threaded and can be spun 45 degrees, yes it should be that simple.

Do NOT follow this link or you will be banned from the site!