We are frequently asked whether it’s possible to add a spa after a pool has already been installed. Provided there’s enough space and no other physical limitations, the answer is an enthusiastic, “Yes!” And as you know, there can be many benefits of spas, including: Stress reduction.
How much is it to redo and shape a pool?
Changing the Shape or Size Changing the shape of a pool starts at around $30,000 for a vinyl pool and $60,000 for a concrete (gunite) pool. This is an invasive project that requires replacing the entire pool lining.
Can an existing pool be modified?
Can a swimming pool shape be changed? In short the answer is yes, usually only if the swimming pool is a concrete structure. Changing the shape of a swimming pool can be very challenging, concrete steps & seats or ledges can easily be added.
How do you remodel an existing pool?
Is pool remodeling a good investment?
A remodeled pool will be especially attractive during the warm months and can be an excellent investment that will lure in more buyers and boost the value of your property. If you’re looking for a place to start, check out pool supplies near me.
What pool upgrades are worth the money?
- Get rid of the old water pump and buy a variable speed pump.
- Get rid of the old and buy new pool lights.
- Get rid of the old paradigms and build yourself an in-ground spa.
- Get rid of those filters and upgrade to sand-based filter systems.
How often do pools need to be resurfaced?
It varies depending on the type of pool, with plaster or cement pools needing to be resurfaced every 3-7 years while fiberglass pools can sometimes go as long as 15-30 years.
Can you fill in the deep end of a pool?
Generally speaking, all pools can be reshaped and reconstructed within certain limits. Vinyl liner pools are usually the most amenable to minor changes. They can be made up to a foot shallower by filling the bottom with concrete and applying a new liner on top.
Can you add a tanning ledge to an existing pool?
A tanning shelf or tanning ledge is the perfect feature to add to an existing swimming pool while under renovation. A tanning shelf is an area inside the pool perimeter that sits just about 6-8″ below water.
What is the best pool resurfacing material?
Fibreglass- At the risk of sounding immodest, fibreglass is one of the best products to resurface a pool. Why? Because it has been a popular type of pool finish for over 40 years due to its strength, versatility, and cost-effectiveness.
Can I paint my inground pool?
You can paint your pool in about a day or two. As with nearly every other type of paint job, the secret to beautiful, long-lasting results is preparation. If you properly drain and clean the pool, the paint application itself should go fairly quickly.
What is pool coping?
In architecture, coping is the protective lip or cap at the top of the wall to complete its look. It also protects it from various elements. Pool design uses it in the same manner. When building your in-ground swimming pool, it will most likely have some exposed steel on its bond or pool wall’s upper surface.
What I Wish I Knew Before building a pool?
- There is a Reason Some Pool Materials Cost More.
- Pool Features are Important to the Overall Enjoyment.
- Not Every “Pool Company” Does a Turnkey Operation.
- Choosing the Wrong Pool Company Can Set You Up for Disappointment.
What raises the value of a home?
- Clean and declutter.
- Add usable square footage.
- Make your home more energy-efficient.
- Spruce it up with fresh paint.
- Work on your curb appeal.
- Upgrade your exterior doors.
- Give your kitchen an updated look.
- Stage your home.
Does a swim spa add value to home?
Pools and spas can add value to a home, but the amount of value they add varies. According to the SF Gate, landscaping can add as much as $38,100 to the value of a home priced at $300,000.
Can you replace pool tile without Replastering?
Yes. The thinset and grout used to install the new tile will fall onto the pool surface. This is not easily brushed off. The pool will likely have to be pressure washed and possibly acid washed after the retile if you are not replastering the pool as well.
What is the size of a cocktail pool?
The Size and Design Most often, cocktail pools are designed at a maximum of 400-500 square feet. Most of them are smaller than this. The average dimensions are about 12’x14′. They’re also usually around four-five feet deep.
Do pools add value to your home in Florida?
The Bottom Line In Florida, it’s estimated that having a pool will increase house value by more than 5% to 8%, considering the factors listed above. That is the climate, ongoing trend, pool service and maintenance, pool landscaping, the lifestyle of buyers.
What is the difference between resurfacing and Replastering a pool?
What happens if you dont resurface your pool?
If you don’t resurface the pool, which is necessary because it is always exposed to weather, cracks and an unevenness in the pool surface will occur and this could lead to algae stains, water leaking and injuries from the uneven surface.
How do I know if my pool needs to be resurfaced?
- Plaster Flaking or Peeling. Maybe you’ve noticed the plaster is peeling along the steps or floor of your pool or spa.
- Surface Stains.
- Roughness.
- Check Cracks.
- Plaster Discolorations.
- Structural Cracks.
- Rust Stains.
- Loss of Pebbles.
What is a good pool depth?
The depth and length of the swimming pool should be 5 feet and 25 feet if you want to have swim laps in it. Most people are satisfied with the standard depths of 3-5 feet in a pool with multiple depths but it cannot be a right decision if you and your spouse’s height are not suitable to those pool depths.
What is a pool Baja shelf?
A baja shelf is often referred to as a tanning ledge because it’s a large area where you could sit in a chair and tan in the sun. Incorporating a baja shelf into your new pool design is a great option if you prefer to lounge in the pool. Many baja shelf designs are large enough to fit a few chairs and a small table.
Can you dive in a 7 foot pool?
If you plan to install a diving board, 8 feet is the minimum depth you will need in the deep end. This depth is deep enough for diving in safely with a diving board. And there is usually no need for a pool to be deeper than 8 feet.
How hard is it to add a spa to an existing pool?
Add onto Existing: In most cases it’s possible to be hot-tub ready by building a new spa right into the swimming pool remodeling and adding the required plumbing / equipment. This can be a little more costly than when building it new but it happens all the time!